Simultaneously Enhancing Strength, Ductility and Corrosion Resistance of a Martensitic Stainless Steel via Substituting Carbon by Nitrogen
Loading...
Date
2023
Journal Title
Journal ISSN
Volume Title
Publisher
Springer
Abstract
ENG: Two martensitic stainless steels of 2Cr12Ni6 type hardened and tempered at 773 K have been studied: the first with 0.2% carbon content and the second with partial replacement of carbon by nitrogen (C0.1N0.1) in the first steel. It is found that the partial substitution of carbon with nitrogen contributed to an increase in ductility and strength of the steel, presumably due to the formation of more dispersive carbonitrides. Meanwhile, the addition of nitrogen suppressed the precipitation of carbonitrides, so that the solid solution strengthening effect of C0.1N0.1 did not decrease significantly after tempering treatment. In addition, the partial replacement of carbon by nitrogen contributed to improved ability against pitting corrosion (PC) in chloride-containing medium (3.5%NaCl at 303 K). The higher resistance to PC of tempered nitrogen-containing steel is apparently due to the lower content of massive carbonitrides, especially the reduced aggregation at grain boundaries. This leads to a lower acidity and aggressiveness of the test solution near the sample surface due to the accumulation of NH4 + ammonium ions in it. As a result of nitrogen addition, exception for Cr 23 C 6 and VC, Cr 2 N and (Cr, V) N type precipitates have also been found in C0.1N0.1 steel and this is consistent with the thermodynamic calculation results. In conclusion, substituting carbon by nitrogen in traditional martensitic stainless steel could realize the simultaneous improvement of multiple properties of martensitic stainless steels. This result provides a promising composition optimization route to develop novel martensitic stainless steels.
Description
L. Deineko: ORCID 0000-0002-1177-3055
Keywords
martensitic stainless steel, strength and ductility, pitting, carbonitrides, КМТОМ
Citation
Li F., Tian J., Li H., Deineko L. M., Jiang Zh. Simultaneously Enhancing Strength, Ductility and Corrosion Resistance of a Martensitic Stainless Steel via Substituting Carbon by Nitrogen. Acta Metallurgica Sinica (English Letters). 2023. Vol. 36, Iss. 5. P. 705–716. DOI: https://doi.org/10.1007/s40195-023-01528-5.