Browsing by Author "Zhuravlov, Anton Yu."
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item About Track Circuit Calculation Method Dependent on Ferromagnet Properties in Conditions of Traction Current Noise Influence(Дніпропетровський національний університет залізничного транспорту імені академіка В. Лазаряна, Дніпропетровськ, 2016) Zhuravlov, Anton Yu.EN: Purpose. The work is intended to investigate the electromagnetic processes in impedance bond in order to improve noise immunity of track circuits (TC) for safe railway operation. Methodology. To achieve this purpose the methods of scientific analysis, mathematical modelling, experimental study, a large-scale simulation were used. Findings. The work examined the interference affecting the normal performance of track circuits. To a large extent, part of track circuit damages account for failures in track circuit equipment. Track circuit equipment is connected directly to the track line susceptible to traction current interference, which causes changes in its electrical characteristics and electromagnetic properties. Normal operability, performance of the main operating modes of the track circuit is determined by previous calculation of its performance and compilation of regulatory tables. The classical method for determination of track circuit parameters was analysed. The classical calculation method assumes representation of individual sections of the electrical track circuit using the quadripole network with known coefficients, usually in the A-form. Determining the coefficients of linear element circuit creates no metrological or mathematical difficulties. However, in circuits containing nonlinear ferromagnets (FM), obtaining the coefficients on the entire induction change range in the cores is quite a difficult task because the classical methods of idling (I) and short circuit (SC) are not acceptable. This leads to complicated methods for determining both the module and the arguments of quadripole network coefficients. Instead of the classical method, the work proposed the method for calculating the track circuit dependent on nonlinear properties of ferromagnets. Originality. The article examines a new approach to the calculation of TC taking into account the losses in ferromagnets (FM), without determination of equivalent circuit quadripole network coefficients. When building the FM reversal model in parallel magnetic fields, the most accurate methods are the approximation ones that take into account not only the changes in values and over time, but also their derivatives. The development of computer hardware and software makes real the mathematical methods for calculating TC with significant change in ferromagnetic inductance, including the saturation areas. Herewith, it is important to search for approximating analytical expression that describes the dynamic limit hysteresis loop (HL). Practical value. The changes in the electrical parameters of the same TC were analysed using the classical and the new calculation methods, the difference made less than 10%. The work introduced some measures to increase operational noise immunity of TC.Item Investigation of Train Shunt Problem in Track Circuits of Signalling and Interlocking Devices(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Razgonov, Adam P.; Zhuravlov, Anton Yu.; Yashchuk, Kateryna I.; Shcheka, Vadym I.EN: Abstract. The problems of electric track circuits calculating were investigated in the works of various authors, it is noted that there is no complete clarity on the definition of shunt resistance. The value of the calculated train shunt resistance in many respects affects the area of signaling systems rail channel stable operation and train traffic safety. It is relevant to study the possibilities of changing the standard value of and the conditions for the execution of track circuits shunt mode, especially for sections of railway with low resistance insulation of the rail line. The surface area of the “wheel-rail” skating, taking into account the different conditions of interaction dynamics and wear of rails and wheel elements were obtained in article. It is shown that the reduction of the normative value of the resistance of the train shunt is appropriate for signaling systems, especially for sections of railway with low resistance insulation of the rail line. An approximate estimate of the geometric parameters of the membrane that forms on the “wheelrail” surface is obtained; proposed a more complete electrical replacing scheme for the train shunt circuit, which allows analyzing the influence of the circuit elements parameters values and the frequency of the signal current. A method for calculating the correlation dependence of the train shunt resistance from wheel-rail surface membrane parameters is proposed.