Browsing by Author "Berezovyi, Mykola I."
Now showing 1 - 5 of 5
Results Per Page
Sort Options
Item Controlling the Speed of Rolling Cuts in Conditions of Reduction of Brake Power of Car Retarders(Дніпропетровський національний університет залізничного транспорту імені академіка В. Лазаряна, Дніпропетровськ, 2016) Kozachenko, Dmytro M.; Bobrovskyi, Volodymyr I.; Grevtsov, Serhii V.; Berezovyi, Mykola I.ENG: Purpose. The study aims to develop the requirements for organization of the marshalling process in the conditions when the power of retarder positions is less than the nominal one. Methodology. The research is carried out using the train traffic safety theory and mathematical modelling of hump processes. Findings. The current technical standard documents regulating the operational performance of humps do not contain direct instructions on how to proceed in the event of brake power loss by car retarders, thus creating threats to the traffic safety. This problem is quite acute for the Ukrainian railways in connection with a chronic shortage of funds for the repair and renewal of technical equipment, including the humps. At the same time, a significant drop in the volume of work leads to the fact that the hump required processing capacity can be provided in case of partial failure of retarders as well. Herewith the most important task is to ensure the breaking-up safety in conditions of parametric failures of retarders. The analysis of dangerous situations, the occurrence of which is possible at humps, as well as the modelling of cut rolling, allowed establishing the connection between the value of retarder tire pressing force on the car wheels and the breaking-up modes, providing the safety of marshalling process. The paper sets the application areas of such measures as the breaking-up speed reduction, breaking-up termination, the use of additional braking by block hangers. Originality. The originality of the work lies in the fact that it first obtained the complex of dependencies that determine the performance requirements for the power of hump retarders and allow the staff to enter the appropriate limits for breaking-up modes to ensure the marshalling process safety. Practical value. The results of the research can be used to supplement the «Instruction on the maintenance of facilities of mechanized and automated humps» in order to determine the limits of breaking-up modes when detecting the reduction of retarder power below the nominal one.Item Identification of the Railway Reconstruction Parameters at Imposition of High Speed Traffic on the Existing Lines(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Lebid, Iryna; Kravchenya, Irina; Dubrovskaya, Tatyana; Luzhanska, Nataliia; Berezovyi, Mykola I.; Demchenko, Yevhen B.ENG: Abstract. The problems of railroad design technical reconstruction aimed at ensuring train protection in introduction of high-speed traffic on the rail lines have been addressed. The description of railroad technical system with certain specific features has been proposed. The pair of mutually dual problems regarding the optimal reconstruction of railway curves for raising train speeds at minimal capital investments has been addressed. The problem of determining the optimal speeds of trains of each category under optimum outer rail cant, increase of the unbalanced acceleration value, compliance with the condition of uniform load on rail tracks, comfortable carriage of passengers, in which reduced costs on increased speeds in curved tracks will be minimal has been formulated. To achieve the goals of the study, mathematical optimization techniques and algorithms of analysis of the rail lines of different nature are used. This, by finding and value engineering optimization, allows to minimize high-value and lengthy procedures of physical simulation. As a problem-solving technique, Lagrange multiplier method and its applicability have been proposed. Numeral solution to the problem of selection of certain stretches for increasing rolling stock speeds on operating lines without reconstruction or with minimum expenses on reconstruction of contour of track has been reviewed.Item Improvement of the Analysis Methods of the Working Hours` Distribution of Locomotive Crews by the Types of Train Operation in Freight Traffic(Dnipro National University of Railway Transport named after Academician V. Lazaryan; Les Ulis: EDP Sciences-Web of conferences, 2019) Kozachenko, Dmytro M.; Berezovyi, Mykola I.; Malashkin, Vyacheslav V.; Bolvanovska, Tetiana V.; Grimak, YuriiENG: Abstract. The work is aimed to increase the efficiency of cargo transportation by railway transport by improving the work organization of locomotive crews. The research is based on the methods of organization of operational work of railways and the methods of mathematical statistics. The problem of increasing the use efficiency of working hours of locomotive crews in freight traffic is considered in the article. Based on the statistical data processing of drivers' routes, the working hours` distribution of locomotive crews for different types of train operation in freight traffic for four locomotive depots was performed. During the research, a conditional division of the working time of locomotive crew by the type of work was performed, if the crew worked with trains of various categories. The algorithm for assigning the idle time and empty running of locomotive to certain types of train operation was also developed. The work originality lies in the fact that it improves the methods of analysis of the working hours` distribution of locomotive crews for certain types of train operation in freight traffic. The developed methods give an opportunity to evaluate the work specifics of individual locomotive depots and provide the initial data for planning the use of locomotives and the work and rest schedule of locomotive crews.Item Introduction of Bimodal Technologies for Transportation of Grain Cargoes(KTU, Lithuania, 2023) Malashkin, Vyacheslav V.; Berezovyi, Mykola I.; Korobiova, Ruslana H.ENG: The purpose of the study is to evaluate the effectiveness of bimodal grain cargo transportation in containers in comparison with other methods of their delivery to seaports. The studying of the grain transportation process is carried out using the methods of mathematical statistics, computer simulation and the theory of organization of railway operational work. Estimation of variants of transportation organization was carried out using the methods of economic-mathematical modeling. The originality of the work is that it received the dependence of the cost of grain cargo delivery on the distance, taking into account the design features of rolling stock and the specific functioning of railway stations for its processing. The practical significance of the work lies in the fact that the implementation of its results allows reducing the logistics costs of grain cargo transportation.Item Optimization of the Enterprise Railcar Fleet Structure for the Transportation of Iron Ore Raw Materials(Kaunas University of Technology, Kaunas, Lithuania, 2021) Kozachenko, Dmytro M.; Hnennyi, Oleh M.; Berezovyi, Mykola I.; Malashkin, Vyacheslav V.ENG: The paper is devoted to the transportation issues of iron ore raw materials by railway transport. The purpose of the research is determining the number of private cars a mining enterprise should have to transport its products. The research is performed using the methods of the theory of railways operation, economic and mathematical modeling, mathematical statistics and direct methods of minimization. During the research the task for determining the number of private cars of the enterprise is reduced to the stochastic problem of minimizing the modified reduced costs of the enterprise, which are represented by a piecewise nonlinear function of one variable. The originality of the work is related to the fact that it has improved the method for calculating the car fleet of enterprises by taking into account differences in the technology of loading private cars and the involved cars of operator companies. The practical value of the work lies in the fact that the proposed method allows one to reduce the logistics costs of mining enterprises due to a more accurate assessment of the costs associated with the development and operation of the car fleet, as well as the accompanying railway infrastructure of sidings.