Development of a New Suspension Electrolyte based on Methanesulphonic Acid for the Electrodeposition of Cu–Tio2 Composites

Loading...
Thumbnail Image
Date
2021
Journal Title
Journal ISSN
Volume Title
Publisher
РС Тесhnology Сеntеr, Kharkiv, Ukraine
Abstract
EN: Electrodeposition of composite coatings based on copper is a promising direction in the creation of advanced materials for multifunctional purposes. An important area of composites application is to use them in the treatment systems for gas emissions and wastewater. It is advisable to use semiconductor oxide materials, in particular titanium dioxide, as the photocatalysts in the photo destruction of organic pollutants of wastewater. The structural features of wastewater treatment equipment require that titanium dioxide particles should be fixed in a rigid matrix. Resolving the task of fixing photosensitive elements at the surface of a certain configuration implies the electrodeposition of coatings by composites, in particular Cu–TiO2. An important factor affecting the functional characteristics of composites and their manufacturing technology is the nature of the electrolyte. It has been shown that the electrodeposition of Cu–TiO2 composites from methane-sulfonate electrolytes makes it possible to reduce the coagulation of the dispersed phase and to obtain coatings with a high content of titanium dioxide from a suspension solution containing no more than 4 g/l of TiO2. It was established that the content of the dispersed phase in the composite made at a current density of 2 A/dm2 and the concentration of titanium dioxide in the electrolyte at the level of 4 g/l is 1.3 % by weight, which is twice as much as when using a sulfate electrolyte. It has been shown that the increase in the content of the dispersed phase in the coatings from 0.1 to 1.3 % by weight is accompanied by an increase in the degree of photo destruction of the colorant from 6 to 15.5 %. The micro-hardness of coatings increases, in this case, by 30 %. The proposed electrolyte to make the Cu–TiO2 composites is an important contribution to the development of the synthesis of wear-resistant high-performance photocatalysts for treating wastewater from organic pollutants.
UK: Електроосадження композиційних покривів на основі міді є перспективним напрямком створення новітніх матеріалів поліфункціонального призначення. Важливим напрямком застосування композитів є використання їх у системах очистки газових викидів та стічних вод. В якості фотокаталізаторів фотодеструкції органічних забруднювачів стічних вод доцільно використовувати напівпровідникові оксидні матеріали, зокрема титан діоксид. Конструкційні особливості обладнання для очищення стічних вод потребують фіксації частинок титан діоксиду в жорсткій матриці. Вирішенням задачі з фіксації фоточутливих елементів на поверхні певної конфігурації є електроосадження покривів композитами, зокрема Cu–TiO2. Важливим фактором, що впливає на функціональні характеристики композитів і технологічне оформлення їх одержання є природа електроліту. Показано, що електроосадження композитів Cu–TiO2 із метансульфонатних електролітів дозволяє зменшити коагуляцію дисперсної фази і одержати покриви з високим вмістом титан діоксиду із суспензійного розчину, що містить не більше 4 г/л TiO2. Встановлено, що вміст дисперсної фази в композиті, одержаному при густині струму 2 А/дм2 і концентрації титан діоксиду в електроліті на рівні 4 г/л, становить 1,3 мас.%, що вдвічі більше ніж при використанні сульфатного електроліту. Показано, що збільшення вмісту дисперсної фази в покривах з 0,1 до 1,3 мас.% супроводжується зростанням ступеню фотодеструкції барвника з 6 до 15,5 відсотків. Мікротвердість покривів зростає при цьому на 30 %. Розроблений електроліт для одержання композитів Cu–TiO2 є важливим внеском у розвиток синтезу зносостійких високоефективних фотокаталізаторів для очистки стічних вод від органічних забруднювачів.
Description
I. Sknar: ORCID 0000-0001-8433-1285; Yu. Sknar: ORCID 0000-0002-1188-3684; T. Hrydnieva: ORCID 0000-0002-0214-4636; P. Riabik: ORCID 0000-0002-1804-9051; O. Demchyshyna: ORCID 0000-0002-0828-3311; D. Gerasimenko: ORCID 0000-0002-0795-761X
Keywords
methane-sulfonate electrolyte, composite coatings, titanium dioxide, photocatalysis, micro-hardness, метано-сульфонат електроліт, композитні покриття, діоксид титану, фотокаталіз, мікротвердість, КФ
Citation
Sknar I., Sknar Y., Hrydnieva T., Riabik P., Demchyshyna O., Gerasimenko D. Development of a New Suspension Electrolyte based on Methanesulphonic Acid for the Electrodeposition of Cu–Tio2 Composites. Eastern-European Journal of Enterprise Technologies. 2021. Vol. 1, Iss. 6 (109). P. 39–47. DOI: 10.15587/1729-4061.2021.224224.