Please use this identifier to cite or link to this item: http://eadnurt.diit.edu.ua/jspui/handle/123456789/11590
Title: Modelling of the Electric Locomotion DS3 Working
Authors: Bannikov, Dmytro O.
Radkevich, Anatoliy V.
Muntian, Antonina O.
Keywords: electric locomotive DC3
design and computing complex SCAD
increasing in the total mass of the machine
КБВ
КІМ
Issue Date: 2019
Publisher: Dnipro National University of Railway Transport named after Academician V. Lazaryan
Citation: Bannikov, D. Modelling of the Electric Locomotion DS3 Working [Electronic resource] / Dmytro Bannikov, Anatoliy Radkevich, Antonina Muntian // MATEC Web of Conferences. – 2019. – Vol. 294 : 2nd International Scientific and Practical Conference “Energy-Optimal Technologies, Logistic and Safety on Transport” (EOT-2019). – P. 1–7. – Access Mode: https://www.matec-conferences.org/articles/matecconf/pdf/2019/43/matecconf_eot18_05006.pdf (21.10.2019). – DOI: 10.1051/matecconf/201929405006.
Abstract: EN: Abstract. The purpose of the work is to evaluate the spatial distribution of the rigidity of the carrier frame and the body of the Ukrainian electric locomotive DC3 as a single system during operation and repair. The research was carried out on the basis of the finite element method with the application of design and computing complex SCAD for Windows. The numerical model of the electric locomotive was built, tested and then used to identify the causes and providing guidance on solving some specific operational questions. They are included, for example, the possibility of eliminating the body skew when jacking up on jacks and jamming the door as a result. The researches showed that the structure of the electric locomotive DS3 in general has a rather high spatial rigidity, both in transverse and longitudinal directions, and on torsion. However, for some practical repair tasks there is not enough for that rigidity. It was recommended to increase the thickness of the shell of its body up to 4 mm or the roof up to 8 mm, which leads to an increasing in the total mass of the machine by about 2,5 and 3,5 tons, respectively.
Description: D. Bannikov: ORCID 0000-0002-9019-9679, A. Radkevich: ORCID 0000-0001-6325-8517, A. Muntian: ORCID 0000-0001-8375-4067
URI: http://eadnurt.diit.edu.ua/jspui/handle/123456789/11590
https://www.matec-conferences.org/articles/matecconf/pdf/2019/43/matecconf_eot18_05006.pdf
https://www.matec-conferences.org/articles/matecconf/abs/2019/43/matecconf_eot18_05006/matecconf_eot18_05006.html
Other Identifiers: DOI: 10.1051/matecconf/201929405006
Appears in Collections:Статті КІМ
Статті КБВ
2nd International Scientific and Practical Conference “Energy-Optimal Technologies, Logistic and Safety on Transport” (EOT-2019)

Files in This Item:
File Description SizeFormat 
Bannikov.pdf979,72 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.